CarPro Clearcut | Rapid Cutting Compound - 250ml/500ml

or make 4 interest-free payments of $6.73 AUD fortnightly with Afterpay More info


Clearcut is an extremely fast acting cutting compound that allows defects to be removed easily and quickly. Save time with this new unique fast and heavy cutting compound.


CarPro have spent years developing a more aggressive, and fast acting cutting compound. With an already successful line of compounds and polishes, Clearcut is again pushing the boundary of abrasive technology, innovating the market with a new rapid cutting formulation.

Clearcut is definitely a time saver. Its sheer aggression allows you to quickly get rid of defects safely and effectively, and can even finish down to a perfect level on some combinations and paints.

Clearcut is made up of extremely fast acting liquid abrasives built from the ground up specialising in efficiency, performance and speed. Clearcut contains no fillers whatsoever, and is a pure cutting compound.

Paving the wave for new technology, Clearcut also has an abstract method for application. Clearcut benefits from using a little bit more compound than usual, and starting off with minimal or no pressure, and then adding a little bit of pressure later in the abrasive cycle!

Next-Gen Compound
Rapid cut
No filling agents
Low dusting
Removes p1000 grit and up
Body shop safe
Compatible with both Dual Action and Rotary machine
Compatible with a variety of foam, microfiber, and wool pads

Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
Spread product across section
Raise speed to HIGH speed with LOW pressure
Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
Increase pressure with each pass, finishing down with heavier pressure
When scratches are gone or polish has been worked through, wipe clean with microfiber towel
Clean pad
Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.