or make 4 interest-free payments of $34.98 AUD fortnightly with More info
Cquartz by CarPro is a revolutionary nano technology SiO2 (silica) based glass coating whose protection is measured in terms of years, not months or seasons.
The Exterior Ceramic Coat Kit consists of the well renowned Cquartz UK Edition 3.0 which is best suited for Australian climate and the Cquartz DLUX wheel & plastic coat to equip you with all you need to protect all paint and wheel surfaces on the exterior of your ride.
*Note the variants come in same packaging for Cquartz DLUX, only difference is in the size of the Cquartz UK Edition 3.0 bottle.
CarPro Cquartz UK is an innovative, ceramic coating that brings your vehicle into new aesthetic and protective heights.
By applying Cquartz UK to your vehicle you are giving it a sacrificial semi permanent glass layer that will give a gloss level that is unmatched by conventional polymer and organic wax based protectants. CQuartz will not simply wash off like traditional paint sealants and will in fact resist harsh chemical based cleaners.
Because of glass coating technologies unique low surface energy formula it is able to fill and level paint ridges which in turn gives the coating a "self cleaning effect" also known as the lotus effect.
This means the coating actively rejects bonding of contamination and when water is introduced to the surface it carries the contamination off with it, this is also aided by the 110 degree water drop angle of CQuartz UK.
Additionally CQuartz UK will help resist scratching and minor marring both from maintenance washing procedures and in general driving use. With additional thickness on top of the manufacturers clear coat, UK has the ability to both resist and absorb damage that commonly occurs to vehicle paintwork.
Make maintenance effortless, and keep your car looking great all year round. Enter the new generation of car care with Cquartz.
Note: Cquartz UK has a faster cure compared to the regular Cquartz. UK is normally easier to use and has a faster wipe off, but for those who prefer a slower cure, or are applying in really hot conditions, regular Cquartz may be a better option.
The UK kit comes will all applicators needed, and also includes a 100mL reload.
For the best results, the surface must be prepared meticulously. All surfaces must be thoroughly washed, and decontaminated with iron removers/clay bars.
Any defects existing in the paintwork will be 'locked in' by the coating, therefore you will want to under go paint correction where necessary to ensure your car will look its best when protected.
Note: The 10mL Cquartz Kit is only for touch ups. It does not come with any applicators or blocks.
DLUX is a semi-permanent wheel & plastic coating coating from CarPro, which helps repel brake dust, and other contaminants from adhering to the surface - making wheel care and maintenance effortless.
CarPro DLUX is a specifically formulated, high temperature resistant coating for both Wheels and Plastics. Coated surfaces become extremely resistant to both heat, and contaminants - rejecting the bond of materials such as brake dust, iron fall out etc.
CarPro DLUX makes maintenance effortless. It can withstand the use of any wheel cleaner, and by rejecting contaminants from adhering to the surface - wheel cleaning can be as simple as just hosing off the dirt/grime on your wheels!
CarPro DLUX also has application in protecting plastic and rubber trim, with a unique darkening effect and two year durability it is perfect for mitigating the need for plastic and trim restoration further down the line and makes these areas simple to clean and maintain.
DLUX may also be used on headlights and taillights to protect them from sand blasting and yellowing. It can also be placed on exhausts/tips to help protect them.
For best results, you need to ensure that the wheel has been completely decontaminated through the use of iron removers, and a clay bar & lubricant. It may be a good idea to try and remove the wheels, cleaning and coating the whole barrel instead of just the faces to ensure optimal results. The wheel must then be prepped with CarPro Eraser before coating.
Wrap the provided suede towel around the applicator block and pour 5-6 drops of DLUX onto it.
Apply the product in even layers in a criss cross pattern to surface to be coated (plastic trim, headlight or alloy wheel) ensuring you use more DLUX as required to cover surface area.
Let the product cure for 10min to 1min at 10 degrees and 30 degrees respectively and wipe off residue using the provided suede MF. or another microfiber cloth
Full Cure Notes: